News

News

Cold sintering produces capacitor material at record low temperatures

Date: 2020-02-27
Views: 241

Cold sintering produces capacitor material at record low temperatures

The dense microstructure of barium titanate as seen under a microscope. Credit: Pennsylvania State University


Barium titanate is an important electroceramic material used in trillions of capacitors each year and found in most electronics. Penn State researchers have produced the material at record low temperatures, and the discovery could lead to more energy efficient manufacturing.

A team of Penn State scientists used the cold sintering process to densify bariumtitanate ceramics at less than 572 degrees Fahrenheit (300 degrees Celsius), the lowest processing temperatures ever used, while maintaining the quality achieved at higher temperatures in modern commercial manufacturing, the researchers said.

'Our work is the first example showing we can densify ferroelectric oxides in a single step,' said Kosuke Tsuji, a doctoral candidate in the Department of Materials Science and Engineering at Penn State and lead author of the study. 'It should open up the possibility to densify many more inorganic materials at low temperatures.'

It is the first time researchers have densified barium titanate in a single step using cold sintering. Previous attempts required secondary heating to produce materials with useful dielectric properties, said the scientists, who reported their findings in the Journal of the European Ceramic Society.

Sintering is a commonly used process to compress fine powders into a solid mass of material using heat and pressure. The cold sintering process, developed by Penn State scientists, accomplishes this at much lower temperatures and in shorter times than conventional sintering. The emerging technologyholds the potential to reduce the costs and environmental impacts of manufacturing a wide range of materials, according to the researchers.

The researchers used new chemistries to densify barium titanate in a single step. Cold sintering involves adding a few drops of liquid to ceramic powder. Reactions between moisture, heat and pressure create denser materials compared to heating at higher temperatures without liquid. 

Previous cold sintering research used neutral or acidic solutions, but the new study incorporated hydroxide, an alkaline material. The hydroxide helped produce barium titanate with the necessary dielectric properties at lower temperatures, the scientists said. 

Barium titanate is the basic compound used to produce high permittivity dielectric materials in multilayer capacitors. Of the more than 3 trillion ceramic capacitors produced each year, about 90 percent contain barium titanate.

'These devices underpin the modern electronic world,' said Randall, who also serves as director of Penn State's Materials Research Institute. 'The implications of applying this technology to barium titanate are enormous. In your cell phone alone, you may have 1,000 components that are all made of barium titanate. It is ubiquitous to all electronics.'

Lowering temperatures used in commercial manufacturing would not only be more energy efficient but could open the door to using less expensive metals and incorporating polymer composites into these capacitors, according to the researchers.

'This is very attractive to many of the leading capacitor companies, which are all working with these researchers through Penn State's Center for Dielectrics and Piezoelectrics (CDP),' Randall said.

Via: https://phys.org/news/

Note: Content may be edited for style and length.


News / Recommended news More
2020 - 07 - 02
A Bochum-based team has developed a new process for zinc oxide layers that can be used for nitrogen oxide sensors as well as protection layer on plastic.The application of zinc oxide layers in industry is manifold and ranges from the protection of degradable goods to the detection of toxic nitrogen oxide gas. Such layers can be deposited by atomic layer deposition (ALD) which employs typically che...
2020 - 07 - 02
Grain boundaries in ceramics may not be as chemically stable as previously thought. So say researchers at the University of Wisconsin-Madison in the US who have found that carbon atoms collect or segregate at the boundaries of silicon carbide – a technologically important ceramic – when the material is exposed to ionizing radiation. The result could help improve our understanding of ceramics in ge...
2020 - 06 - 24
Waste heat is all around you. On a small scale, if your phone or laptop feels warm, that's because some of the energy powering the device is being transformed into unwanted heat.On a larger scale, electric grids, such as high power lines, lose over 5% of their energy in the process of transmission. In an electric power industry that generated more than US$400 billion in 2018, that's a tremendous a...
2020 - 06 - 17
When most people think of ceramics, they might envision their favorite mug or a flowerpot. But modern technology is full of advanced ceramics, from silicon solar panels to ceramic superconductors and biomedical implants.Many of those advanced polycrystalline ceramics are combinations of crystalline grains which, at the microscopic level, resemble a stone fence held together with limestone mortar. ...
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch
Tel: 4000 778 909 
E-mail:irisexpo@163.com

Guangzhou Branch
Tel: 020-8327 6389
E-mail:iacechina@unifair.com

IACE CHINA Official Website
犀牛云提供企业云服务
犀牛云提供云计算服务
Scan