News News
Engineers at the University of California, San Diego have developed a process for welding ceramics that could have wide-ranging implications for the hardiness and construction of electronics.According to a paper published in Science on August 23rd,, UC-San Diego researchers have used a sub-50-watt, rapidly-pulsing laser to melt and fuse ceramics, upending traditional ceramics welding methods by dramatically lowering the temperature at which the material binds.Traditionally, ceramics have been difficult to weld because they require immense amounts of heat to make them malleable enough to fuse. While heating ceramics to these temperatures isn’t difficult, cooling them uniformly has been challenging—if a ceramic material cools in uneven conditions, it’s susceptible to cracking, spli...
发布时间: 2019 - 09 - 11
浏览次数:245
Shimadzu has announced the release of three models of the GCMS NX series gas chromatograph mass spectrometers. The new NX series, which consists of the GCMS-TQ8050 NX, the GCMS-TQ8040 NX, and the GCMS-QP2020 NX, combines the features of high accuracy and high sensitivity, with ease of maintenance, and improved operating efficiency. The GCMS NX series will be exhibited at JASIS, which will be held at Makuhari Messe from September 5 to 7.
发布时间: 2018 - 11 - 27
浏览次数:369
The Japanese MIM industry has reported its first growth in output for seven years, with sales rising to Yen 11.74 billion ($103.5 million) in 2017 – a healthy increase of 14.5% compared with the previous year.
发布时间: 2018 - 11 - 26
浏览次数:359
3D CERAM-SINTO is one of the pioneers of additive printing technology for components made of technical ceramics and has extensive knowledge in terms of the process and the materials used in this field.
发布时间: 2018 - 11 - 19
浏览次数:419
With additive manufacturing (AM) techniques being widely adopted in industries worldwide, design engineering and manufacturing are undoubtedly being ushered into a new era of development. But, how environmentally sustainable are AM materials?
发布时间: 2018 - 11 - 19
浏览次数:359
3-D printing is an unstoppable force. Not too long ago, the printing speed and limited output of 3-D printers made them suitable only for rapid prototyping. But in the coming years, 3-D printers will be at the heart of full-scale production capabilities in several industries, from aerospace to automotive to health care to fashion. Manufacturing as we know it will never be the same.
发布时间: 2018 - 11 - 14
浏览次数:150
Total42ArticlePage6/9HomePrev123456789NextEnd
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch
Tel: 4000 778 909 
E-mail:irisexpo@163.com

Guangzhou Branch
Tel: 020-8327 6389
E-mail:iacechina@unifair.com

IACE CHINA Official Website
犀牛云提供企业云服务
犀牛云提供云计算服务
Scan